KUHN PLOUGH DEVELOPMENTS IMPROVE IN-FIELD EFFICIENCIES

Multi-Master L

The Multi-Master L extends the company’s Master mounted plough range, sitting between the Master 153 and 183 models. Available with 4, 5 or 6 bodies, there are both in-furrow and on-land formats suitable for tractors from 200 to 300 horsepower. On-land models can be set up to also work in-furrow. A new working width adjustment system allows furrow width to be set at 35, 40, 45 or 50cm without removing any bolts. 
 

Also new on the Multi-Master L is an integrated adjustable press arm that enables simultaneous furrow pressing to conserve moisture and create optimum seedbed conditions. With a reinforced anchor, the press arm is designed for use with the heaviest rollers on the market and is adjustable either mechanically or hydraulically from the tractor cab (as an option). The press arm is designed to allow ploughing up to the edge of the field and is suitably compact in transport to fit within the dimensions of the plough. 
As with other ploughs in KUHN’s Master range, the Multi-Master L is available with traction bolt or non-stop hydraulic safety. The optional Opti-Drive headstock suspension system provides additional protection of both plough and tractor when in work or in transport.

Multi-Leader XT

The Multi-Leader XT has been added to KUHN’s semi-mounted single-wheel plough range. Available in the UK with 7 or 8 bodies, this heavy-duty plough is suitable for tractors up to 400 horsepower. 
Both in-furrow and on-land versions of the plough are available, with the on-land version also able to be set up to work in-furrow. 
Operational efficiency, and reduced fuel use, is ensured by a new draw line correction system that optimises traction and minimises wear on the plough. As with the Multi-Master L, this plough benefits from tool-free adjustments to allow quick and simple set-up, minimising down-time and increasing the performance in the field.
Offset adjustment capability on the Multi-Leader XT allows the on-land version of this plough to work effectively with large tractors, up to 5.4m wide, which includes dual wheel set-ups and tracked machines. The Multi-Leader XT can also be used with a press arm and both traction bolt and non-stop hydraulic safety systems are available.