Find a dealer near you
Download the Literature

PROFILE 2 DL Twin-Auger Mixers

PROFILE 2 DL mixer silhouette

Your made-to-measure mixer, designed for intensive use

The PROFILE 2 DL mixers have 2 vertical augers, a large hopper and feed out via direct side doors. Available in 18 to 34 m3 capacities, these machines are suited to herds of between 90 and 265 cattle.

Find a dealer near you

Mixers with 2 vertical augers - designed for intensive use.

With capacities starting at 18 m3 and ranging up to 34 m3 , these machines are ideal for larger scale farms and manoeuvering around tight spaces.
This new range of PROFILE mixer wagons sets a whole new standard in the trailed mixer wagon sector.

The PROFILE 2 DL mixer wagons have been designed to make the most of maximum tub capacity with the lowest possible overall height. Available with single axles for the 18 to 26 m3 models and with bogie axles for the 28 to 34 m3 models, the PROFILE 2 DL mixer wagons are built to handle the yard and the road.
PROFILE 2 DL vertical twin auger mixer at work

Your benefits

A perfectly even mix for your feed

K-NOX technology to ensure the long-term performance of your KUHN mixer wagon

K-NOX Technology (optional)

To ensure the long-term performance of your PROFILE 2 DL mixer wagon, the K-NOX augers are designed to substantially reduce wear and tear caused by abrasion and silage acidity.
The wear and tear which affects the mixing auger over the years, will be spread evenly across the whole surface of the mixing auger and also on the central cone. That’s why K-NOX mixing augers are built entirely from the same alloy: auger, cone and scraper.
K-NOX is an alloy containing:
  • Chrome (“stainless” steel) providing greater resistance to the acidic silage effluant.
  • Ferrites provide mechanical resistance in particular when loading heavy and abrasive products.
The K-NOX technology will increase the resale value of your machine should you decide to sell it. Second-hand mixers are valued based on the wear of the augers, rather than their age. A machine whose main components are still in perfect condition will naturally retain a higher resale value.

Exclusive KUHN mixing auger!

The double-pitch angle of the auger enables quick breakdown of feed, no matter how full the machine already is.

To reduce power consumption, the PROFILE range is equipped with asymmetric knives which have a “self-cleaning” effect and also have a progressive-cutting knife edge for constant torque transfer. The continuous auger helix naturally moves the fodder from the bottom to the top of the tub for even mixing with no forced movements, reducing fuel consumption during the mixing process.

The auger material and design has been selected to provide maximum resistance to wear.
Exclusive KUHN mixing auger for KUHN PROFILE mixer wagons

Tried and tested transmission and drive systems!

The machine transmission is made up of a two-stage bearing therefore even during breakdown of a whole bale, stress is absorbed.
The combination of the pre-stressed subframe and the solid auger base provides maximum resistance to the load bearing in the bottom of the machine.
The unit is fitted on a collar which reaches up to approximately half the auger height, thus protecting the transmission from lateral forces exerted on the auger.
Tried and tested transmission: representing KUHN's extensive experience and technological expertise.

20% extra volume!

The height/width ratio of the mixing tub places the mixers in the PROFILE 2 DL range firmly among the most compact solutions on the market.
The integrated chassis reduces overall height, while retaining excellent ground clearance. For example, the PROFILE 26 m3 unit stands 3.01 m tall.
The height/width ratio of the PROFILE range makes these some of the most compact machines on the market

Weighing system: choose your level of data

The dimensions of the cells and the patented integration system ensure that the KUHN PROFILE 2 DL/2CL mixers deliver precise weighing for everything from small loads to full loads, with a maximum volume of 34 m3

5 load cells: a patented KUHN exclusive!

Precision in small mixtures and accuracy for large tonnages.

The weighing system on the PROFILE 2 DL-CL-PLUS range is designed with load cells integrated into a cradle between the axle and the tub. The load cells are positioned in the direction of travel of the machine, not perpendicularly. None of the constraints related to transport affect the structure of the load cells.

The sensitivity of the 63.50 mm diameter load cells is much better than for 80 mm load cells. Small mixtures (pre-mixes of a few dozen kilograms) will be weighed and managed with greater precision.

The large number of load cells (five in total for the PROFILE 2 DL-CL-PLUS range) improves the weighing accuracy for even the heaviest mixtures (mixtures of fodder and feed with a low percentage of dry matter).

Optional DATA ADVANCE software for Data Transfer

  • Programming (via cloud communication) from PC or smartphone
  • Editing of ingredients, rations and feed batches from the weighing terminal
  • Editing of the number of animals from the weighing terminal
  • Lists and reports of completed programs with summary of operator discrepancies
  • Multi-user management (admin – users)
  • Monitoring with indicator customisation
  • Data exchange via 3G modem or USB flash drive
  • Calculation of ration costs and dry matter content
  • Stock management
With your KUHN DG600 weighing terminal, your can choose the optional "DTM ADVANCE" software for data transfer

With your weighing terminal, choose your digital assistant!

You can choose one of these digital devices to run the solutions offered along with the weighing terminals. You can take your new assistant with you everywhere! You’ll be able to control your mixer weighing system during loading and feeding, but also from your office.
  • with the indestructible BLACKVIEW BV5900 mobile assistant, you have your weighing system in your pocket!
  • or the all terrain CROSSCALL CORE T-4 mobile assistant for optimal navigation!
With the DG600 and DG8000-IC programmable weighing systems, you can choose one of the digital devices to control your mixer weighing system

Two  interfaces to fit how you manage your feed-related information

The 2 applications KUHN Datamix VIEW and KUHN Datamix CONTROL are pre-installed on your weighing assistant. You’re bound to have all your needs met with the easy-to-use secondary display unit (KUHN Datamix VIEW) and the application that lets you program and perform all the functions of your mixer’s weighing unit from your assistant (KUHN Datamix CONTROL). You can access all the weighing data within a communication range of 90 m around your machine. The signal is automatically reset when you re-enter the range.
  • With the KUHN Datamix VIEW, your assistant becomes the secondary display you'll never leave behind!
  • with the KUHN Datamix CONTROL, your assistant becomes the control centre for your machine's weighing system.
Two different interfaces to fit how you manage your feed-related information

The simple solution for rapid feed flow!

Configure your PROFILE machine to meet your needs, not the other way round!

A wide selection of possible combinations!

For each member of the herd to get their maximum feed intake, the feed-out of the mixed ration must be evenly mixed and distributed across the whole length of the feed passage. It’s important to reduce competition for feed between livestock in the same pen. All animals must get their fair share of quality mixed rations!

When the animals return to the buildings after grazing, providing a homogeneous ration is the best solution to avoid them pushing and shoving for feed.

The PROFILE range features an impressive selection of feed-out solutions to ensure distribution of the rations in all the types of buildings. Whether you have sheds with no separate exit, troughs with retaining rims or very narrow feed passages, feeding tables on both sides of the passage requiring simultaneous distribution, or other constraints requiring distribution from the rear of the machine, you will find what you need in the PROFILE range.

Distribution chutes: express delivery!

Distribution chutes can be fitted upon request to the right or left or rear central for feed delivery into all building configurations.

The doors are the largest on the market (their width represents over 60% of the auger diameter).

The PROFILE mixer wagon is fitted with a deflection plate to avoid driving over the feed-out. The protective canvas prevents fodder projections beyond the trough.
Distribution chutes for feed delivery into all building configurations

Tilting conveyors to adapt to all types of troughs

The PROFILE range can be fitted with a large selection of hydraulically tilting conveyors to deliver feed to raised troughs. The tilting conveyors come in different lengths and are designed with PVC belts.

They start up automatically when the hatch door is opened to prevent forage build-up at the tub outlet.

The PROFILE tilting conveyors are quiet, always clean and easy to service: simply adjust the belt tension on a regular basis.
PROFILE_D_Tilting_Conveyor.jpg

Interested in these benefits Find your nearest dealer

Equipment

K-NOX substantially reduces wear and tear caused by abrasion and feed acidity

K-NOX Mixing augers and K-NOX doubling plates: Long Life Solutions!

K-NOX substantially increases the life expectancy of the auger - the central component of the mixer which determines its level of performance. The entire mixing auger is made of K-NOX: the whole unit is protected (coil, cone, scraper) therefore it is more resistant to the wear and tear caused by friction, acidic feed and general corrosion.
For even greater durability, the K-NOX doubling plates are available as an option.
Magnets: play it safe with your animals!

Metal trap: play it safe!

All the models in the PROFILE range can be fitted with a magnet on the mixing auger. This system considerably reduces intestinal injuries caused by the ingestion of metal fragments contained in the fodder (barbed wire, scrap wire etc.).
Hydraulic counter-knives on KUHN PROFILE mixers for fibrous rations that require more chopping

Hydraulic counter-knives for fibrous rations that require more chopping

For fibrous rations that require more chopping, add the option of two hydraulic counter-knives. Then you can extend and retract the counter-knives as needed from the tractor cab.
KUHN mixers: fingertip control of your machine

Electric controls: fingertip control of your machine

The user-friendly electric system provides you with fingertip control of your machine. The small control box can be fitted in any type of tractor cab.
Dealing with an expanding herd and the new buildings layouts

A machine that can adapt to your herd size and ration type

KUHN mixers grow with your farm. As a result of an increase in your herd size or a change to ration components, you may be required to change the capacity of your TMR mixer. Depending on your model in the PROFILE range, you can increase your machine’s capacity by at least 89 %.
    PROFILE 2 DL at work

    Specifications

    Technical characteristics
     
    Capacity (m3)
    Mixing system
    Height of mixing auger (mm)
    Minimum PTO power requirement kW (hp)
    PTO speed (min-1)
    Output mini/maxi (l/min) at 180 bar (pressure required)
    Minimum tractor hydraulic requirement with direct control
    Minimum tractor hydraulic requirement with electric control (optional)
    PROFILE 18.2 DL PROFILE 20.2 DL PROFILE 24.2 DL PROFILE 26.2 DL PROFILE 28.2 DL PROFILE 30.2 DL PROFILE 34.2 DL
    18 20 24 26 28 30 34
    2 vertical augers 2 vertical augers 2 vertical augers 2 vertical augers 2 vertical augers 2 vertical augers 2 vertical augers
    900 900 900 900 1 100 1 100 1 300
    66 (90) 70 (95) 81 (110) 85 (115) 88 (120) 92 (125) 95 (130)
    540 540 540 540 540 540 540
    20 - 50 20 - 50 20 - 50 20 - 50 20 - 50 20 - 50 20 - 50
    1 DA for chute and 1 DA per additional function 1 DA for chute and 1 DA per additional function 1 DA for chute and 1 DA per additional function 1 DA for chute and 1 DA per additional function 1 DA for chute and 1 DA per additional function 1 DA for chute and 1 DA per additional function 1 DA for chute and 1 DA per additional function
    1 SA with free return 1 SA with free return 1 SA with free return 1 SA with free return 1 SA with free return 1 SA with free return 1 SA with free return

    Download the Literature

    Media

    PROFILE 2 DL at work
    PROFILE 2 DL at work
    PROFILE 2 DL at work
    More

    User Stories:PROFILE 2 DL

    • scott-kingston-fedder-focus-test-kuhn-agriculuture-quality-forage
      Scott Kingston Dairy Farmer

      “The mixing capability is important for all rations, but particularly for the transition diet where we’re including a significant amount of straw,” adds Scott. “We don’t use a separate straw-grinder but instead use the Profile to chop and mix the straw into the transition diet.''

      Read this review

    Read all testimonials

    Available applications: PROFILE 2 DL

    Download on the App Store

    Check out all of our KUHN apps to optimise your farm business

    Szerezze be a Google Play-en

    FOR CONTRACTORS AND LARGE FARMS

    In today's world of farming, where fields are getting larger and time is of the essence, having reliable and efficient machinery is crucial. At KUHN, we are here for contractors and big farms like yours. 

    View all machinery for large farms