Excellence and precision, ANTIS 2 vineyard orchard sprayer

Excellence and precision with the ANTIS 2 sprayer

ANTIS 2 trailed sprayers represent the KUHN's premium range of vineyard and orchard sprayers, they are perfectly suited to goblet-trained or trellised orchards, depending on the chosen fan type. With a tank capacity between 1,000 - 2,000 liters, plus an 820, 850 or 920 mm front-suction fan.

Find a dealer near you

Download the Literature

Benefits
Equipment
Specifications
Media

KUHN sprayers are built on a common design that ensures stability and easy handling. Each machine features a balanced 3-in-1 tank, a robust frame, wheels suited to various conditions, a versatile axle, and three drawbar options for optimal manoeuvrability.

The ANTIS 2 sprayers are built to the highest standards, featuring a premium finish and ensuring consistent and even distribution of crop protection products. Every detail has been carefully thought out to ensure an intuitive and efficient user experience.

Photo du pulvérisateur ANTIS 2 au transport

A stable, manoeuvrable machine

Robust, durable frame

The products used in sprayers can be highly corrosive, and even small traces of rust can damage the frame. With its galvanized coating, the frame is fully protected against corrosion, delivering enhanced durability and reliability for your work in vineyards and orchards.

Stay balanced!

The 3-in-1 tank is designed for optimum ergonomics and outstanding stability. The three polyethylene tanks (main tank, clean water tank and hand-washing tank) are symetrical and fit together seamlessly. This design ensures balanced operation, whether in transport or during use. Stability is maintained, regardless of tank volumes.

Wheels for all conditions

The wheels on KUHN's vineyard and orchard sprayers offer maximum flexibility. On dry ground, "standard" wheels are perfect. For wet or soft soils prone to sinking, wide or low-pressure wheels are recommended. These wheels reduce ground pressure, minimizing compaction between rows. What's more, wide wheels enhance machine stability on sloping terrain.

Adjustable Half-Axles for Maximum Stability and Flexibility

The two half-axles allow you to adjust the track width for narrow inter-row spacing or widen it for enhanced stability on uneven or sloping terrain.
The half-axles can be turned over, offering two different positions. In the lower position, they ensure maximum stability. In the upper position, they increase ground clearance by up to 20 cm.

Visuel des demi-essieux des pulvérisateurs PDF 2, GEO M 2, GEO 2, ANTIS M 2 et ANTIS 2

Three types of drawbar

Three types of drawbar are available on KUHN sprayers:

The straight drawbar is ideal for fields without space constraints at row ends, and offers excellent stability.

The articulated drawbar has two positions: transport and work. In the transport position, it locks in place, offering the same features as the straight drawbar. In work position, it allows tighter turns with a rearward pivot point, combining both stability and manoeuvrability.

The pivoting drawbar, mounted on the tractor's lift arms, shifts the pivot point rearward to make tight turns easier. Its simple mechanical design ensures exceptional manoeuvrability.

Timon tournant disponible sur les pulvérisateurs PDF 2, GEO M 2, GEO 2, ANTIS M 2 et ANTIS 2

Spray precision

Photo du pulvérisateur ANTIS 2 au travail

Front Air Suction: Protection and Efficiency

Front air suction helps protect the operator from exposure to the products being applied. If any product drifts toward the front of the sprayer, it is sucked in by the fan.

This system also minimizes the risk of drawing in soil debris like leaves or cut grass. As a result, there’s no risk of fan blockage, ensuring consistent airflow and air volume throughout the operation.

R-82 and R-92 Fans

The ANTIS 2 sprayer can be fitted with a round 820 or 920 mm diameter front-suction fan. The fan's rounded shape makes it ideally suited to goblet-trained trees. It generates a powerful, consistent air flow, meaning it can spray at a greater distance from trees and effectively target tall crops. This versatility also makes this fan an excellent choice for trellised orchards, such as vineyards or apple orchards.

Variable-tilt blades and a two-speed multiplier adapt the amount of air generated to the trees' growth stage, for optimized spraying. Air deflectors and air straighteners ensure a uniform air flow directed at the target.

Vue arrière du pulvérisateur ANTIS 2 avec une turbine ronde R-82

V-82, V-85 and V-92 Fans

V-shape front-suction fan with diameters of 820, 850 or 920 mm are also available for ANTIS 2 sprayers. This "V-shape" fan is ideal for trellised trees such as grapevines or apple trees, which are generally spaced at a maximum of 2 to 4 m apart. Thanks to its shape, the fan directs the airflow sideways, spraying only the trees and not the top of the machine where there is no vegetation. The trees' proximity and the shape of the fan ensure that the target is effectively reached.

Variable-tilt blades and a two-speed multiplier adapt the amount of air generated to the trees' growth stage, for optimized spraying. Air deflectors and air straighteners ensure a uniform air flow directed at the target.

Vue arrière du pulvérisateur ANTIS 2 avec une voûte V-92

High-performance pump

This pump offers large spray rates of 120 or 160 liters per minute, significantly increasing on-site production rates. With a maximum high pressure of 50 bar, it offers efficient, powerful spraying.

Furthermore, the pump features cataphoresis protection, making it exceptionally resistant to corrosive products. This increases service life and reduces maintenance time, maximizing your equipment's durability and reliability.

Flexible nozzle holders

This sprayer is equipped with double rotary jets, and can be fitted with two different nozzles to meet your individual spraying needs. Changing nozzles is a simple matter of tilting, offering great flexibility of use. What's more, nozzles can be shut off when they're not needed, for example when they're too low to the vegetation.

Double jets tournants du pulvérisateur ANTIS 2

Ergonomic use

Poste de mise en œuvre ergonomique du pulvérisateur ANTIS 2

Ergonomic workstation

The loading station features centralized valves strategically placed at the front of the machine, making them quick and easy to reach.

The storage compartment can be replaced with a chemical induction bowl if necessary.

Anti-clogging spray processes

The ANTIS 2 sprayer features four basic filtration levels: a sieve filter, a suction filter, a pressure filter and section filters. This multiple filtration system greatly reduces the risk of clogging nozzles and pipes, delivering optimum performance and low maintenance.

Filtre d'aspiration du pulvérisateur ANTIS 2

Maximize Precision with electronic regulation system

Our electronic regulation system automatically fine-tunes the spray rate based on the sprayer’s speed. This ensures uniform product application, minimizes waste, and reduces costs. This technology brings unmatched precision and saves you valuable time in the field.

Simple and Safe Product Induction

For a safer and more convenient filling process, the sprayers offer an optional chemical induction bowl. This eliminates the need to lift heavy containers over the tank opening, enhancing operator safety and comfort. The chemical induction bowl comes with a can rinser and built-in rinse nozzles for efficient product mixing and inductor rinsing.

Opérateur vidant un bidon dans l'incorporateur du pulvérisateur ANTIS 2

Efficient Rinsing

To maximize effectiveness, the sprayers feature an optional tank rinsing system featuring rotating nozzles. This ensures no product residue remains in the tank before a new solution is added, prevents deposits on the tank walls, and keeps nozzles and pipes from clogging. The result is optimal performance and a longer lifespan for your equipment.

Emplacement du remplissage de la cuve de rinçage sur le pulvérisateur ANTIS 2

Equipment

A range of optional equipment is also available to support user comfort and/or performance. The result is a machine perfectly tailored to the needs of each individual application.

External venturi suction system

This sprayer can be fitted with a 5-meter hose to draw water from an external source. A screen at the end of the pipe filters out impurities such as sand and leaves.
There's also a 1m hose available for sucking up powdered or pure liquid products.

Albuz CVI nozzles ®

Albuz CVI 80° ® ceramic nozzles spray a flat (brush-like) jet at an 80° angle. They spray large droplets charged with air bubbles, which burst into fine droplets upon contact with the plants. This reduces drift and increases the plants’ overall coverage.

Albuz TVI anti-drift nozzles for round fans

Albuz TVI 80° ® ceramic nozzles use air suction to spray a hollow conical jet (turbulence type) at an 80° angle. They spray large droplets charged with air bubbles, which burst into fine droplets upon contact with the plants. This reduces drift and increases the plants’ overall coverage.

Side shutters for air flow closure

Side shutters are an optional extra for machine canopies, allowing the air flow to be cut off on the right and/or left-hand section, thus completely inhibiting product volatility. They are particularly useful near residential areas as they limit the local residents' risk of product exposure.

Triple flip-over nozzles

Triple flip-over nozzles can be substituted for double flip-over nozzles as an optional extra. They allow you to carry three nozzles instead of two, while still being able to switch easily from one type of nozzle to another.

Photo du de l'atomiseur ANTIS 2 au travail

Specifications

Frame


Type of frame

1502 R-92	2002 V-85	1002 V-82	1002 V-92	1002 R-92	1502 R-82	1502 V-92	2002 V-82	1502 V-82	1002 R-82	1502 V-85	2002 R-82	2002 V-92	2002 R-92	1002 V-85
Galvanized steel with under-tank protection plate and additional step	Galvanized steel with under-tank protection plate and additional step	Galvanized steel with under-tank protection plate and additional step	Galvanized steel with under-tank protection plate and additional step	Galvanized steel with under-tank protection plate and additional step	Galvanized steel with under-tank protection plate and additional step	Galvanized steel with under-tank protection plate and additional step	Galvanized steel with under-tank protection plate and additional step	Galvanized steel with under-tank protection plate and additional step	Galvanized steel with under-tank protection plate and additional step	Galvanized steel with under-tank protection plate and additional step	Galvanized steel with under-tank protection plate and additional step	Galvanized steel with under-tank protection plate and additional step	Galvanized steel with under-tank protection plate and additional step	Galvanized steel with under-tank protection plate and additional step

Tank


Main tank capacity (L)
Type of tank
External ball gauge
Clean water tank capacity (L)
Hand-washing tank capacity (L)
Main tank agitation
Filtration

1502 R-92	2002 V-85	1002 V-82	1002 V-92	1002 R-92	1502 R-82	1502 V-92	2002 V-82	1502 V-82	1002 R-82	1502 V-85	2002 R-82	2002 V-92	2002 R-92	1002 V-85
1500	2000	1000	1000	1000	1500	1500	2000	1500	1000	1500	2000	2000	2000	1000
Polyethylene	Polyethylene	Polyethylene	Polyethylene	Polyethylene	Polyethylene	Polyethylene	Polyethylene	Polyethylene	Polyethylene	Polyethylene	Polyethylene	Polyethylene	Polyethylene	Polyethylene
Standard - Front and side position	Standard - Front and side position	Standard - Front and side position	Standard - Front and side position	Standard - Front and side position	Standard - Front and side position	Standard - Front and side position	Standard - Front and side position	Standard - Front and side position	Standard - Front and side position	Standard - Front and side position	Standard - Front and side position	Standard - Front and side position	Standard - Front and side position	Standard - Front and side position
124	124	102	102	102	124	124	124	124	102	124	124	124	124	102
15	15	15	15	15	15	15	15	15	15	15	15	15	15	15
2 hydraulic agitators + return to tank	2 hydraulic agitators + return to tank	2 hydraulic agitators + return to tank	2 hydraulic agitators + return to tank	2 hydraulic agitators + return to tank	2 hydraulic agitators + return to tank	2 hydraulic agitators + return to tank	2 hydraulic agitators + return to tank	2 hydraulic agitators + return to tank	2 hydraulic agitators + return to tank	2 hydraulic agitators + return to tank	2 hydraulic agitators + return to tank	2 hydraulic agitators + return to tank	2 hydraulic agitators + return to tank	2 hydraulic agitators + return to tank
Quadruple : Filling / Suction / Pressure / Sections	Quadruple : Filling / Suction / Pressure / Sections	Quadruple : Filling / Suction / Pressure / Sections	Quadruple : Filling / Suction / Pressure / Sections	Quadruple : Filling / Suction / Pressure / Sections	Quadruple : Filling / Suction / Pressure / Sections	Quadruple : Filling / Suction / Pressure / Sections	Quadruple : Filling / Suction / Pressure / Sections	Quadruple : Filling / Suction / Pressure / Sections	Quadruple : Filling / Suction / Pressure / Sections	Quadruple : Filling / Suction / Pressure / Sections	Quadruple : Filling / Suction / Pressure / Sections	Quadruple : Filling / Suction / Pressure / Sections	Quadruple : Filling / Suction / Pressure / Sections	Quadruple : Filling / Suction / Pressure / Sections

Pump


Model
Maximum pressure (bar)
Maximum flow (L/min)

1502 R-92	2002 V-85	1002 V-82	1002 V-92	1002 R-92	1502 R-82	1502 V-92	2002 V-82	1502 V-82	1002 R-82	1502 V-85	2002 R-82	2002 V-92	2002 R-92	1002 V-85
Piston-diaphragm pump L160	Piston-diaphragm pump L160	Piston-diaphragm pump L120	Piston-diaphragm pump L120	Piston-diaphragm pump L120	Piston-diaphragm pump L160	Piston-diaphragm pump L160	Piston-diaphragm pump L160	Piston-diaphragm pump L160	Piston-diaphragm pump L120	Piston-diaphragm pump L160	Piston-diaphragm pump L160	Piston-diaphragm pump L160	Piston-diaphragm pump L160	Piston-diaphragm pump L120
50	50	50	50	50	50	50	50	50	50	50	50	50	50	50
153	153	116	116	116	153	153	153	153	116	153	153	153	153	116

Fan


Type of fan
Diameter (mm)
Shape
Clutch
Air straighteners
Upper deflectors
Type of multiplier

1502 R-92	2002 V-85	1002 V-82	1002 V-92	1002 R-92	1502 R-82	1502 V-92	2002 V-82	1502 V-82	1002 R-82	1502 V-85	2002 R-82	2002 V-92	2002 R-92	1002 V-85
Front suction	Front suction	Front suction	Front suction	Front suction	Front suction	Front suction	Front suction	Front suction	Front suction	Front suction	Front suction	Front suction	Front suction	Front suction
920	850	820	920	920	820	920	820	820	820	850	820	920	920	850
Round	V-shape	V-shape	V-shape	Round	Round	V-shape	V-shape	V-shape	Round	V-shape	Round	V-shape	Round	V-shape
Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard
Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard
Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard
2 speeds + 1 neutral	2 speeds + 1 neutral	2 speeds + 1 neutral	2 speeds + 1 neutral	2 speeds + 1 neutral	2 speeds + 1 neutral	2 speeds + 1 neutral	2 speeds + 1 neutral	2 speeds + 1 neutral	2 speeds + 1 neutral	2 speeds + 1 neutral	2 speeds + 1 neutral	2 speeds + 1 neutral	2 speeds + 1 neutral	2 speeds + 1 neutral

Tractor


Power required (hp)
Road homologation

1502 R-92	2002 V-85	1002 V-82	1002 V-92	1002 R-92	1502 R-82	1502 V-92	2002 V-82	1502 V-82	1002 R-82	1502 V-85	2002 R-82	2002 V-92	2002 R-92	1002 V-85
70	60	60	70	70	60	70	60	60	60	60	60	70	70	60
EU Homologation - 40 km/h	EU Homologation - 40 km/h	EU Homologation - 40 km/h	EU Homologation - 40 km/h	EU Homologation - 40 km/h	EU Homologation - 40 km/h	EU Homologation - 40 km/h	EU Homologation - 40 km/h	EU Homologation - 40 km/h	EU Homologation - 40 km/h	EU Homologation - 40 km/h	EU Homologation - 40 km/h	EU Homologation - 40 km/h	EU Homologation - 40 km/h	EU Homologation - 40 km/h

Dimensions


Length (m)
Width (m)
Height (m)
Weight (kg)

1502 R-92	2002 V-85	1002 V-82	1002 V-92	1002 R-92	1502 R-82	1502 V-92	2002 V-82	1502 V-82	1002 R-82	1502 V-85	2002 R-82	2002 V-92	2002 R-92	1002 V-85
3.65	4.10	3.65	3.65	3.50	3.65	3.95	4.10	3.95	3.50	3.95	3.85	4.10	3.85	3.65
1.55	1.60	1.25	1.40	1.20	1.55	1.45	1.60	1.45	1.20	1.45	1.60	1.60	1.60	1.35
1.45	2.45	1.85	2.20	1.25	1.45	2.30	2.00	2.00	1.25	2.45	1.50	2.30	1.50	2.30
700	740	570	590	590	680	700	700	680	570	730	700	720	720	610

Media

Photo du de l'atomiseur ANTIS 2 au travail dans un verger

Photo de l'atomiseur ANTIS 2 au transport

View the gallery in full screen