DURAKUHN carbide mixer knives
Réf. A5365240
Find all genuine KUHN parts with carbide reinforcement perfectly adapted to your KUHN mixer.
Carbide-coated knives for mixers
If you were wondering whether carbide-coated knives existed for your mixer, the answer is ‘yes’!
We recommend using DURAKUHN carbide mixer knives for a lasting optimum cut of your feed. What coated knives means for you:
- lower power requirement
- knife edge as sharp as a razor thanks to the carbide coating
- double-serrated effect from the ribbed part of the coating resulting in a faster, cleaner re-cut
Service life often multiplied by 2.2 compared to non-carbide coated parts.
The expert says:
« We have been working on a new procedure for tungsten carbide coating. It has been specially created for intensive use and abrasive rations that need a fine cut. The comparative tests carried out on the same machine showed the lifespan as 2.2 times longer than for non-coated parts. The ribbed part of the coating creates a double-serrated effect that produces a faster and cleaner cut. »
Loïc TOULOTTE, Product Manager for Bedding and Feeding
Here is a selection of knives available for your mixer
Coated attachment screw for mixers
The mixer screw is also carbide coated because DURAKUHN technology has been applied to the head of the screw that holds the knife in place, to maximise resistance to wear.
Here is a selection of screws available for your mixer
Coated sections for straw blowers
Tungsten carbide coated sections are available in the KUHN range. They are the best compromise between wear resistance and shock resistance.
Here is a selection of sections available for your machine
Find all the parts and the catalogue directly on MyKUHN
Subscribe quickly and for free!
Go to MyKUHN